New “Workplace Transport Safety” online training module published

Our latest title ‘Workplace Transport Safety’ is now available online.

This course will help employers, and those responsible for workplace transport, to reduce the risk of accidents occurring.

Others, such as drivers of on-site vehicles, and employees who are likely to encounter them as pedestrians, will also find it useful.

The course includes a module on Whole Body Vibration.
Request information and booking by ringing Eric on 07961346544
http://www.plustraining.co.uk

Advertisements

Focus on… Unsafe Maintenance at a Sawmill

What happened?

Two incidents at a sawmill have highlighted the importance of having safe maintenance procedures in place.  In the first incident a worker fell through a gap in the walkway, seriously injuring his shoulder. Less than three months later a worker received crush injuries to his head and neck when the hoist he was working on started up.

http://www.hse.gov.uk/woodworking/focuson.htm

Bury firm sentenced after woman’s fingers severed

A worker in a factory, manufacturing lids for food containers, had four fingers severed in a lid-punching machine that had been modified by her employers.

Chadwicks of Bury Ltd, which produces lids for yogurt pots, ice cream cartons and other food containers, was prosecuted by Health and Safety Executive (HSE) following the incident at the company’s Villiers Street factory on 15 May 2008.

The 51-year-old worker, who has asked not to be named, was rethreading silver paper through the machine when the cutting tool restarted, severing four fingers on her right hand.

The HSE investigation found the company had covered the sensors on the machine so it could be used to cut paper instead of foil lids. The sensors would have stopped the machine operating when paper was being rethreaded through the cutting tool, if they had not been disabled.

Chadwicks of Bury pleaded guilty to breaching Regulation 11(1) of the Provision and Use of Work Equipment Regulations 1998 by failing to prevent access to dangerous parts of machinery. The company was fined £22,500 with £8,708 costs at Manchester’s Minshull Street Crown Court today. http://www.hse.gov.uk/press/2010/coi-nw-65chadwicks.htm

Worker’s arm injured by two tonne metal plate

An Edinburgh steel fabricating firm has been fined after an employee’s arm and hand were severely injured while lifting steel plates.

On 21 August 2009, Ian Sutherland was working with a colleague to mark a delivery of sheet metal plates with unique identifying numbers before they could be accepted into the factory.

The metal plates, each weighing more than two tonnes, were placed on top of each other. This meant that they each had to be lifted in turn so that the next plate down could be marked.

At the time of the incident, it was the company’s practice for a crane operator to lift the plates by approximately 18 inches using bare hooks. A wooden baton would then be placed in between the plates, the intended purpose of which was to protect the operators while reaching in to mark the lower plate.

Only a month before the incident occurred, HSE had carried out an inspection of the site. At that time, the HSE inspector had highlighted the importance of using the proper lifting equipment and the need for employees to have the correct training and supervision.

Mr Sutherland placed his right arm between the two plates to mark the lower plate, when the upper plate slipped from the hook it was held by and fell onto his arm.

Mr Sutherland’s right forearm was broken and needed surgery to insert a six inch steel plate to support it. His middle finger on his right hand was also broken and needed to be pinned in three places. More than a year after the incident, Mr Sutherland still has a constant dull ache in his arm and has limited strength, and is unable to grip items properly.

An investigation by the Health and Safety Executive (HSE) showed that Forth Steel Ltd had an unsafe procedure in place for lifting the steel plates. The investigation also showed that the company had not carried out a suitable assessment of the risks involved when employees worked under a suspended load and that the crane operator had not received any formal lifting training, despite the company identifying this need some months earlier.

Forth Steel Ltd of South Gyle Crescent, Edinburgh, pleaded guilty to breaching section 2 of the Health and Safety at Work etc Act 1974 by failing to ensure that there was a safe system of work for the lifting of the plates, and not providing their employees with the information, instruction and training they needed to ensure their health and safety. At Edinburgh Sheriff Court today (8 December), the company was fined £50,000.

Following the case, HSE inspector Kerry Cringan said:

“This was a serious and entirely preventable incident that has left Mr Sutherland with lasting pain and discomfort, and affected his quality of life.

“Forth Steel Ltd was using a wholly inappropriate system of work, and despite previous discussions about lifting activities, used inappropriate equipment when the propriety plate grabs were available.” http://www.hse.gov.uk/press/2010/coi-sco-20710.htm

Worker paralysed after being crushed by reel of paper

An employee of a major paper producer in North Wales has been left paralysed from the chest down after being crushed by a two tonne reel of paper.

Christopher John Shaw, from Wirral, was working as an assistant winder for SCA Hygiene Products UK Ltd when the incident occurred on 29 July 2007.

Mr Shaw (38) was involved in producing and preparing paper reels at the firm’s site in Oakenholt, Flint. He was using his body weight to slow down a moving paper reel when he slipped. The reel, which was around two metres in diameter, then rolled onto him causing serious crush injuries which left him with paralysis.

The Health and Safety Executive (HSE) prosecuted the firm after an investigation and at Mold Crown Court it pleaded guilty to breaching Section 2(1) of the Health and Safety at Work etc Act 1974. It was fined £120,000 and ordered to pay full costs of £18,514

HSE inspector Will Gretton said:

“Employees using their body weight to slow down such large and potentially dangerous items as paper reels, clearly isn’t a safe way of working.

“There were clear risks that weren’t properly managed by the company, which resulted in Mr Shaw’s horrific injuries.

“The consequences of this incident could have been even more serious. The company has now put into place more effective measures to protect the health and safety of their employees, unfortunately too late for Mr Shaw.” http://www.hse.gov.uk/press/2010/coi-w-le806w10.htm

Two workers exposed to asbestos at Aston University

A Birmingham-based university has been fined, along with a security systems firm, after two workers were exposed to dangerous asbestos fibres while fitting CCTV cameras.

The worker and a 17-year-old trainee were installing the cameras in the reception area at Aston University’s Recreation Centre on 21 July 2009 when they drilled into material containing asbestos fibres.

Both the university and Warwickshire-based Access Fire and Security Ltd – the contractor carrying out the work – were prosecuted by the Health and Safety Executive (HSE) following the incident.

Birmingham Magistrates’ Court heard the university failed to follow its own procedures on managing, planning and preparing for the installation and the arrangements were unclear and not widely known within the university.

Aston University, of Aston Triangle, Birmingham, pleaded guilty to breaching Regulation 5(1) of the Management of Health and Safety Regulations 1999 and Regulation 4(9)(c) of the Control of Asbestos Regulations 2006 and was fined £4,000 and ordered to pay £2,000 costs.

Access Fire and Security Ltd, which operates from a unit in Henley Court, Henley-in-Arden, and is registered at an address in Yardley Wood, Billesley, Birmingham, pleaded guilty to breaching Regulation 5(a) of the Control of Asbestos Regulations 2006 and was fined £1,000 and ordered to pay £1,000 costs.

Karl Raw, the investigating inspector at HSE, said:

“While the amount of asbestos involved in this incident was small, two people now have to live with the knowledge that they may become ill from lung disease in the future.

“Aston University failed to ensure university employees and others working across the site were aware of the presence of asbestos fibres.

“Surveys on the location and conditions of asbestos and materials containing asbestos had been carried out across the university but there was no procedure for communicating the details to contractors.

“Access Fire and Security Ltd, a long-term contractor with the university, had never been given any information about asbestos – and had never asked for it. They also failed to assess whether asbestos was present, what type of asbestos was involved and what condition it was in, before undertaking work.” http://www.hse.gov.uk/press/2010/coi-wm-29210.htm

Maintenance firm fined after Heathrow incident

A worker suffered injuries to his face and knees when he fell two metres in a maintenance hangar at Heathrow Airport.

John Nicholas, 59, from Gloucester, was employed by aircraft maintenance company Messier Services Ltd, and was replacing the landing gear at the front of an A340 aircraft when the incident happened.

An investigation by the Health and Safety Executive (HSE) found Mr Nicholas and a colleague were using a fork lift truck in an attempt to align the barrel of the main landing gear fitting with the socket on the underside of the aircraft.

During the operation Mr Nicholas realised the alignment was not correct and in an attempt to correct it kneeled down on an unsecured pallet designed to support the landing gear, two metres above the floor.

However, the forklift truck supporting the pallet reversed suddenly causing the pallet to drop to the floor. Mr Nicholas fell with the pallet, fracturing his knee cap and suffering significant injuries to the left side of his face. Since the incident he has needed a number of operations to his mouth and teeth.

The HSE investigation found the work was not properly planned and the pallet being used did not have a proper adjustment to help align the landing gear and the socket on the underside of the aircraft.

Messier Services Ltd, which has its UK offices in Meteor Business Park, Cheltenham Road East, Gloucestershire, pleaded guilty to breaching Section 2(1) of the Health and Safety at Work etc Act 1974.

It was fined £7,200 and ordered to pay costs of £11,820 at the City of London Magistrates’ Court today.

Following sentencing HSE inspector Steve Kirton said:

“This company did not properly plan this work even though it was a core part of its operations.  Mr Nicholas has suffered severe injuries to his face and knees purely due to a lack of planning.

“Messier should have either found a way working at ground level or provided a safe way of working at height with access to the right equipment.

“Employers need to plan work and assess the risk to people not only in their own premises, but also when the work takes place in another company’s property.” http://www.hse.gov.uk/press/2010/coi-ldn-0212.htm